Acer AB460 F1 User Manual
Page 321
301
Clicking the IP S
TANDARD
ACL tab brings up the IP S
TANDARD
ACL
C
ONFIGURATION
page, which displays the various ACL (Access Control
List) parameters to configure the Standard IP access lists. The
parameters for this page are shown in the following table.
Parameter
Description
ACL Number
This parameter specifies the unique ID for the access
list. This value must be in the range from 1 to 1000.
Action
This parameter specifies whether the packets must be
allowed or dropped when a match has been found.
Source and
Destination IP
Address
This parameter specifies the IP Address of the Source
and Destination for which the access list must be
applied.
Subnet Mask
This parameter specifies the Source and Destination
Address Mask corresponding to the IP Address.
Ports List
(Incoming)
This parameter specifies the Incoming Port List for
which the access list has to be applied.
Ports List
(Outgoing)
This parameter specifies the Outgoing Port List for
which the access list has to be applied.