Acer AB460 F1 - Manual (Page 584)

5 Acer Smart Blade Manager 564
CMM
Select one of the CMM modules to open the CMM UI.
Status
IP: Shows the CMM IP address.
Master/Slave: Shows the CMM master/slave status. A master CMM has
full management of the blade server. A slave CMM is a backup to the
master CMM.
Status: Shows the CMM status.
Firmware Version: Shows the CMM firmware version.
Firmware Tag: Shows the CMM firmware tag.
CMM Time: Shows the CMM time. The CMM time shown in the text
field may not match the current time. Click Get to reload the CMM
time immediately. Click Set to set the CMM time. See the next section
for more details on setting CMM time.
Setting CMM time
There are two ways to set the CMM time: You may specify the time or
synchronize with NTP (Network Time Protocol) server time.
User Specific Time allows you to enter time values for the CMM
internal real-time clock.
Synchronizing with the NTP Server allows your CMM real-time clock to
obtain time information from an NTP server. Enter the IP address for
the primary or secondary NTP server.
UTC Offset allows you to offset the UTC timer.