Acer AB460 F1 - Manual (Page 381)

361
RSTP Basic Settings
Clicking the B
ASIC
S
ETTINGS
tab brings up the RSTP C
ONFIGURATION
page,
which displays the various parameters for RSTP configuration. The
parameters for this page are shown in the following table.
Parameter Description
System Control This parameter allows you to start or shutsdown RSTP
in the switch.
RSTP Status This parameter allows you to enable/disable the
protocol at a global level on the switch.
Compatibility This parameter allows you to choose to run the
protocol as an RSTP or STP compatible version.
Bridge Priority This parameter specifies the B RIDGE P RIORITY , which can
be used to select the root bridge.
Transmit Hold
Count This parameter specifies the maximum number of
packets that can be sent in a given interval. This is
configured to avoid flooding.