beautypg.com

Using electrical power – Acer AB460 F1 User Manual

Page 4

background image

iv

Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating.
These openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug
or other similar surface. This product should never be placed near
or over a radiator or heat register, or in a built-in installation
unless proper ventilation is provided.

Never push objects of any kind into this product through cabinet
slots as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never spill liquid
of any kind onto or into the product.

To avoid damage of internal components and to prevent battery
leakage, do not place the product on a vibrating surface.

Never use it under sporting, exercising, or any vibrating
environment which will probably cause unexpected short current
or damage rotor devices, HDD, Optical drive, and even exposure
risk from lithium battery pack.

This product is not suitable for use with visual display workplace
devices according to B2 of the German Ordinance for Work with
Visual Display Units.

Using electrical power

This product should be operated from the type of power indicated
on the marking label. If you are not sure of the type of power
available, consult your dealer or local power company.

Do not allow anything to rest on the power cord. Do not locate
this product where people will walk on the cord.

If an extension cord is used with this product, make sure that the
total ampere rating of the equipment plugged into the extension
cord does not exceed the extension cord ampere rating. Also,
make sure that the total rating of all products plugged into the
wall outlet does not exceed the fuse rating.

Do not overload a power outlet, strip or receptacle by plugging in
too many devices. The overall system load must not exceed 80% of
the branch circuit rating. If power strips are used, the load should
not exceed 80% of the power strip's input rating.

This product's power supply is equipped with a three-wire
grounded plug. The plug only fits in a grounded power outlet.
Make sure the power outlet is properly grounded before inserting
the power supply plug. Do not insert the plug into a non-