Acer AB460 F1 - Manual (Page 302)

4 Networking Switch Modules 282
This page also has a control to Reset To Factory Defaults. This clears all
switch configuration and local user accounts information. This reset
requires reboot of the switch.
Warning! Make sure to have all necessary configurations backed
up before doing "Reset To Factory Defaults".
This page also provides a control to Reboot the switch. In stacking, the
Switch Identifier is displayed on top of this reboot button. You can
select the interested stack member switch to reboot the corresponding
switch. You can also select the ALL option to reboot all stack members.
Device Location Use this parameter to change the device location.
PIM Mode Use this to configure the PIM status of the switch.
Snoop forwarding
Mode You can use this parameter to change the Snoop
Fowarding Mode between MAC based and IP based.
Switch Start MAC
address This is a display for the Switch Start MAC address.
Configuration
Restore Status This is a display for the Configuration Restore Status
Device Up Time This is a display for the Device Up Time.
HTTP Server Status This is a display for the HTTP Server Status.
HTTP Port Number This is a display for the HTTP Port Number.
Parameter Description