Acer AB460 F1 - Manual (Page 450)

4 Networking Switch Modules 430
BGP Peer Configuration
Clicking the N
EIGHBORS
tab brings up the BGP P
EER
C
ONFIGURATION
page,
which allows you to configre BGP Neighbors. The parameters for this
page are shown in the following table.
Parameter Description
IP Address This parameter specifies the IP address of the BGP
neighbor.
EBGP MultiHop By enabling this feature, BGP connections can be
established between peers, which are not directly
connected.
Next Hop Using this parameter, next Hop can be set as Self or
Automatic . By setting this field to Self , you can make
the switch the next hop for all the routes that it
distributes to its peers.
Keep Alive Time
(Seconds) This parameter specifies the maximum time interval
between successive updates between any two BGP
peers.