Acer AB460 F1 - Manual (Page 317)

297
Syslog Configuration
Clicking the L OGGING tab brings up the S YSLOG C ONFIGURATION page,
which allows you to configure logging parameters. The parameters for
this page are shown in the following table.
Figure 4-185. Syslog Configuration
Parameter Description
Syslog This parameter enables or disables the Syslog feature.
Server IP Address This parameter specifies the Syslog server IP address.
Make sure the Server IP is reachable.
Buffer Size The buffer size is specfied in log entries. Max entries
buffered is
200 .
Timestamp This parameter allows you to enable or disable the
adding of a timestamp to the log messages.
Console Log This parameter allows you to enable or disable logging
to the console.