Acer AB460 F1 - Manual (Page 411)

391
LoopBack Basic Settings
Clicking the L
OOP
B
ACK
S
ETTINGS
tab brings up the L
OOP
B
ACK
B
ASIC
S
ETTINGS
page, which allows you to configure loopback IP interfaces.
The parameters for this page are shown in the following table.
Parameter Description
LoopBack Interface This parameter is the name of the loopback interface
getting created.
Interface Type This parameter is always the loopback for this
configuration.
Interface Status This parameter for the I NTERFACE S TATUS can be set to
Up or Down .
IP Address This parameter specifies the IP address for this
loopback interface.
Subnet Mask This parameter specifies the subnet mask for this
loopback interface.