Acer AB460 F1 - Manual (Page 355)

335
Stack Details
Clicking the S
TACK
D
ETAILS
tab brings up the S
TACK
D
ETAILS
page, which
displays stacking details. The parameters for this page are shown in the
following table.
Stacking This parameter enables or disables stacking.
NOTE:
Any change in stacking status requires a reboot of the
switch.
Figure 4-214. Stack Details
Parameter Description
Self Status
Stack Ports This is the number of stacking ports configured in this
switch.
Switch ID This parameter is used to specify the switch identifier
of this switch.
Stack IP This parameter is used to specify the IP address of this
switch. This IP address is used to communicate between
stack member switches.
Parameter Description