Acer AB460 F1 - Manual (Page 471)

451
GMP Snooping
The GMP Snooping link allows you to configure GMP Snooping
through the following pages:
•
“IGMP Snooping Configuration” on page 451
• “IGMP Snooping Timer” on page 453
• “IGMP Snooping Interface” on page 454
• “IGMP Snooping VLAN Router” on page 455
• “IGMP MAC Forwarding” on page 456
IGMP Snooping Configuration
Clicking the B
ASIC
S
ETTINGS
tab brings up the IGMP S
NOOPING
C
ONFIGURATION
page, which allows you to configure IGMP snooping
parameters. The parameters for this page are shown in the following
table.
Parameter Description
System Control This parameter Starts or Shutsdown IGS in the switch.
IGMP Snooping
Status This parameter enables or disables IGMP snooping
globally in the switch. To enable IGS, GMRP status must
be
Disabled .