Virtual interface – Acer AB460 F1 User Manual
Page 435

415
Virtual Interface
Clicking the V
IRTUAL
I
NTERFACE
tab brings up the OSPF V
IRTUAL
I
NTERFACE
C
ONFIGURATION
page. The parameters for this page are shown in the
following table.
Authentication Key
This parameter specifies the key required for
authentication, if authentication is enabled on this
interface.
IP Address
This parameter specifies the IP Address of the OSPF
interface.
Designated Router
This read-only field specifies the IP Address of the
Designated Router.
Status
When this parameter is enabled, the interface is
advertised as an internal route to some area. When
disabled it denotes that the interface is external to
OSPF.
Parameter
Description