Port monitoring – Acer AB460 F1 User Manual
Page 362

4 Networking Switch Modules
342
Port Monitoring
Clicking the P
ORT
M
ONITORING
tab brings up the P
ORT
M
ONITORING
page,
which allows you to enable or disbale monitoring on port interface.
The parameters for this page are shown in the following table.
MTU
This sets the MTU value. The Minimum is
90
and
Maximum is
16338
. A port must be administrativly
down in order to change the MTU.
Link Up/Down Trap
This parameter enables or disables SNMP trap
generation for port up and down events.
Figure 4-219. Port Monitoring
Parameter
Description
Status
This parameter enables or disables the port
monitoring.
Port
This displays the port number.
Parameter
Description