Rainbow Electronics W90N745CDG - Manual (Page 179)

W90N745CD/W90N745CDG
- 174 -
Host Controller Interrupt Status Register
All bits are set by hardware and cleared by software.
REGISTER ADDRESS R/W DESCRIPTION RESET VALUE
HcInterruptStatus 0xFFF0_500C R/W Host Controller Interrupt Status Register 0x0000_0000
31 30 29 28 27 26 25 24
Reserved OCH Reserved
23 22 21 20 19 18 17 16
Reserved
15 14 13 12 11 10 9 8
Reserved
7 6 5 4 3 2 1 0
Reserved RHSC FNO URE RDT SOF WDH SCO
BITS DESCRIPTION
[31] Reserved Reserved
[30] OCH
OwnershipChange
This bit is set when the OwnershipChangeRequest bit of
HcCommandStatus is set.
[29:7] Reserved
[6] RHSC
RootHubStatusChange
This bit is set when the content of HcRhStatus or the content of any
HcRhPortStatus register has changed.
[5] FNO
FrameNumberOverflow
Set when bit 15 of FrameNumber changes value.
[4] URE
UnrecoverableError
This event is not implemented and is hard-coded to ‘0.’ Writes are
ignored.
[3] RDT
ResumeDetected
Set when Host Controller detects resume signaling on a downstream
port.
[2] SOF
StartOfFrame
Set when the Frame Management block signals a ‘Start of Frame’
event.