ZyXEL Communications 5 Series User Manual
Page 808
ZyWALL 5/35/70 Series User’s Guide
808
Appendix L Firewall Commands
config edit firewall e-mail
mail-server mail server> This command sets the IP address to which config edit firewall e-mail return-addr This command sets the source e-mail address config edit firewall e-mail email-to This command sets the e-mail address to config edit firewall e-mail policy weekly> This command sets how frequently the firewall config edit firewall e-mail day | wednesday | thursday | friday | saturday> This command sets the day on which the config edit firewall e-mail hour <0-23> This command sets the hour when the firewall config edit firewall e-mail minute <0-59> This command sets the minute of the hour for Attack config edit firewall attack send-alert This command enables or disables the config edit firewall attack block Set this command to yes to block new traffic config edit firewall attack block-minute <0-255> This command sets the number of minutes for Table 288 Firewall Commands (continued) FUNCTION COMMAND DESCRIPTION
the e-mail messages are sent.
of the firewall e-mails.
which the firewall e-mails are sent.
log is sent via e-mail.
current firewall log is sent through e-mail if the
ZyWALL is set to send it on a weekly basis.
log is sent through e- mail if the ZyWALL is set
to send it on an hourly, daily or weekly basis.
the firewall log to be sent via e- mail if the
ZyWALL is set to send it on a hourly, daily or
weekly basis.
immediate sending of DOS attack notification
e-mail messages.
after the tcp-max-incomplete threshold is
exceeded. Set it to no to delete the oldest half-
open session when traffic exceeds the tcp-
max-incomplete threshold.
new sessions to be blocked when the tcp-
max-incomplete threshold is reached. This
command is only valid when block is set to
yes.