ZyXEL Communications 5 Series - Manual (Page 691)

ZyWALL 5/35/70 Series User’s Guide
Chapter 50 IP Policy Routing 691
C
H A P T E R
5 0
IP Policy Routing
This chapter covers setting and applying policies used for IP routing. This chapter applies to
the ZyWALL 35 and ZyWALL 70.
50.1 IP Routing Policy Summary
Menu 25 shows the summary of a policy rule, including the criteria and the action of a single
policy, and whether a policy is active or not. Each policy contains two lines. The former part is
the criteria of the incoming packet and the latter is the action. Between these two parts,
separator "|" means the action is taken on criteria matched and separator "=" means the action
is taken on criteria not matched.
Figure 434 Menu 25: Sample IP Routing Policy Summary
The following table describes the fields in this screen.
Menu 25 - IP Routing Policy Summary
# A Criteria/Action
--- - -------------------------------------------------------
001 N SA=1.1.1.1-1.1.1.1 DA=2.2.2.2-2.2.2.5
SP=20-25 DP=20-25 P=6 T=NM PR=0 |GW=192.168.1.1 T=MT PR=0
002 N _______________________________________________________
_______________________________________________________
003 N _______________________________________________________
_______________________________________________________
004 N _______________________________________________________
_______________________________________________________
005 N _______________________________________________________
_______________________________________________________
006 N _______________________________________________________
_______________________________________________________
Select Command= None Select Rule= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Table 254 Menu 25: Sample IP Routing Policy Summary
FIELD DESCRIPTION
# This is the policy index number.
A This displays whether a policy is active (Y) or not (N).