ZyXEL Communications 5 Series - Manual (Page 101)

ZyWALL 5/35/70 Series User’s Guide
Chapter 3 Wizard Setup 101
3.4 VPN Wizard Network Setting
Use this screen to name the VPN network policy (IPSec SA) and identify the devices behind
the IPSec routers at either end of a VPN tunnel.
Two active SAs cannot have the local and remote IP address(es) both the same. Two active
SAs can have the same local or remote IP address, but not both. You can configure multiple
SAs between the same local and remote IP addresses, as long as only one is active at any time.
Remote
Gateway
Address Enter the WAN IP address or domain name of the remote IPSec router (secure
gateway) in the field below to identify the remote IPSec router by its IP address or a
domain name. Set this field to 0.0.0.0 if the remote IPSec router has a dynamic WAN
IP address.
Back Click Back to return to the previous screen.
Next Click Next to continue.
Table 16 VPN Wizard: Gateway Setting
LABEL DESCRIPTION