beautypg.com

2 configuration file upload – ZyXEL Communications 5 Series User Manual

Page 673

background image

ZyWALL 5/35/70 Series User’s Guide

Chapter 47 Firmware and Configuration File Maintenance

673

Figure 419 Telnet Into Menu 24.7.1: Upload System Firmware

47.5.2 Configuration File Upload

You see the following screen when you telnet into menu 24.7.2.

Figure 420 Telnet Into Menu 24.7.2: System Maintenance

To upload the firmware and the configuration file, follow these examples

Menu 24.7.1 - System Maintenance - Upload System Firmware

To upload the system firmware, follow the procedure below:

1. Launch the FTP client on your workstation.

2. Type "open" and the IP address of your system. Then type "root" and

SMT password as requested.

3. Type "put firmwarefilename ras" where "firmwarefilename" is the

name of your firmware upgrade file on your workstation and "ras" is the

remote file name on the system.

4. The system reboots automatically after a successful firmware

upload.

For details on FTP commands, please consult the documentation of your

FTP client program. For details on uploading system firmware using TFTP

(note that you must remain on this menu to upload system firmware using

TFTP), please see your manual.

Press ENTER to Exit:

Menu 24.7.2 - System Maintenance - Upload System Configuration File

To upload the system configuration file, follow the procedure below:

1. Launch the FTP client on your workstation.

2. Type "open" and the IP address of your system. Then type "root" and

SMT password as requested.

3. Type "put configurationfilename rom-0" where

"configurationfilename" is the name of your system configuration file on

your workstation, which will be transferred to the "rom-0" file on the

system.

4. The system reboots automatically after the upload system

configuration file process is complete.

For details on FTP commands, please consult the documentation of your

FTP client program. For details on uploading configuration file using

TFTP (note that you must remain on this menu to upload configuration

file using TFTP), please see your manual.

Press ENTER to Exit: