ZyXEL Communications 5 Series - Manual (Page 649)

ZyWALL 5/35/70 Series User’s Guide
Chapter 45 SNMP Configuration 649
C
H A P T E R
4 5
SNMP Configuration
This chapter explains SNMP configuration menu 22.
45.1 SNMP Configuration
To configure SNMP, enter 22 from the main menu to display Menu 22 - SNMP
Configuration as shown next. The “community” for Get, Set and Trap fields is SNMP
terminology for password.
Figure 395 Menu 22: SNMP Configuration
The following table describes the SNMP configuration parameters.
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Table 240 SNMP Configuration Menu Fields
FIELD DESCRIPTION
Get Community Type the Get community, which is the password for the incoming Get- and GetNext
requests from the management station.
Set Community Type the Set community, which is the password for incoming Set requests from the
management station.
Trusted Host If you enter a trusted host, your ZyWALL will only respond to SNMP messages from
this address. A blank (default) field means your ZyWALL will respond to all SNMP
messages it receives, regardless of source.
Trap
Community Type the Trap community, which is the password sent with each trap to the SNMP
manager.