beautypg.com

Table 166 system error logs, Table 167 access control logs – ZyXEL Communications 5 Series User Manual

Page 511

background image

ZyWALL 5/35/70 Series User’s Guide

Chapter 30 Logs Screens

511

Table 166 System Error Logs

LOG MESSAGE

DESCRIPTION

%s exceeds the max.

number of session per

host!

This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.

setNetBIOSFilter: calloc

error

The router failed to allocate memory for the NetBIOS filter settings.

readNetBIOSFilter: calloc

error

The router failed to allocate memory for the NetBIOS filter settings.

WAN connection is down.

A WAN connection is down. You cannot access the network
through this interface.

Dial Backup starts

Dial backup started working.

Dial Backup ends

Dial backup stopped working.

DHCP Server cannot assign

the static IP %S (out of

range).

The LAN subnet, LAN alias 1, or LAN alias 2 was changed and the
specified static DHCP IP addresses are no longer valid.

The DHCP static IP %s is

conflict.

The static DHCP IP address conflicts with another host.

SMTP fail (%s)

The device failed to send an e-mail (error message included).

SMTP authentication fail

(%s)

The device failed to authenticate with the SMTP server (error
message included).

Table 167 Access Control Logs

LOG MESSAGE

DESCRIPTION

Firewall default policy: [ TCP |

UDP | IGMP | ESP | GRE | OSPF ]

Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched the default policy and was blocked or forwarded
according to the default policy’s setting.

Firewall rule [NOT] match:[ TCP

| UDP | IGMP | ESP | GRE | OSPF ]

,

Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched (or did not match) a configured firewall rule
(denoted by its number) and was blocked or forwarded
according to the rule.

Triangle route packet forwarded:

[ TCP | UDP | IGMP | ESP | GRE |

OSPF ]

The firewall allowed a triangle route session to pass
through.

Packet without a NAT table entry

blocked: [ TCP | UDP | IGMP | ESP

| GRE | OSPF ]

The router blocked a packet that didn't have a
corresponding NAT table entry.

Router sent blocked web site

message: TCP

The router sent a message to notify a user that the router
blocked access to a web site that the user requested.