ZyXEL Communications 5 Series - Manual (Page 609)

ZyWALL 5/35/70 Series User’s Guide
Chapter 41 IP Static Route Setup 609
C
H A P T E R
4 1
IP Static Route Setup
This chapter shows you how to configure static routes with your ZyWALL.
41.1 IP Static Route Setup
Enter 12 from the main menu. Select one of the IP static routes as shown next to configure IP
static routes in menu 12.1.
The first two static route entries are for default WAN1 and WAN2 routes on a
ZyWALL with multiple WAN ports; the first static route entry is for the default
WAN route on a ZyWALL with a single WAN port. You cannot modify or delete
a static default route.
The default route is disabled after you change the static WAN IP address to a
dynamic WAN IP address.
The “-” before a route name indicates the static route is inactive.
Figure 352 Menu 12: IP Static Route Setup
Now, enter the index number of the static route that you want to configure.
Menu 12 - IP Static Route Setup
1. Reserved 16. ________ 31. ________ 46. ________
2. Reserved 17. ________ 32. ________ 47. ________
3. ________ 18. ________ 33. ________ 48. ________
4. ________ 19. ________ 34. ________ 49. ________
5. ________ 20. ________ 35. ________ 50. ________
6. ________ 21. ________ 36. ________
7. ________ 22. ________ 37. ________
8. ________ 23. ________ 38. ________
9. ________ 24. ________ 39. ________
10. ________ 25. ________ 40. ________
11. ________ 26. ________ 41. ________
12. ________ 27. ________ 42. ________
13. ________ 28. ________ 43. ________
14. ________ 29. ________ 44. ________
15. ________ 30. ________ 45. ________
Enter selection number: