ZyXEL Communications 5 Series - Manual (Page 197)

ZyWALL 5/35/70 Series User’s Guide
Chapter 10 Wireless LAN 197
The following table describes the labels in this screen.
After you change the LAN/DMZ/WLAN port roles and click Apply, please wait for few
seconds until the following screen appears. Click Return to go back to the Port Roles screen.
Figure 89 NETWORK > WLAN > Port Roles: Change Complete
10.6 Wireless Security
Wireless security is vital to your network to protect wireless communication between wireless
stations, access points and other wireless.
The figure below shows the possible wireless security levels on your ZyWALL. EAP
(Extensible Authentication Protocol) is used for authentication and utilizes dynamic WEP key
exchange. It requires interaction with a RADIUS (Remote Authentication Dial-In User
Service) server either on the WAN or your LAN to provide authentication service for wireless
stations.
Table 53 NETWORK > WLAN > Port Roles
LABEL DESCRIPTION
LAN Select a port’s LAN radio button to use the port as part of the LAN. The port will
use the LAN IP address.
DMZ Select a port’s DMZ radio button to use the port as part of the DMZ. The port will
use the DMZ IP address.
WLAN Select a port’s WLAN radio button to use the port as part of the WLAN.
The port will use the WLAN IP address.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.