ZyXEL Communications 5 Series - Manual (Page 256)

ZyWALL 5/35/70 Series User’s Guide
256 Chapter 13 Configuring IDP
13.2 General Setup
Use this screen to enable IDP on the ZyWALL and choose what traffic flows the ZyWALL
checks for intrusions.
Click SECURITY > IDP from the navigation panel. General is the first screen as shown in
the following figure.
Figure 132 SECURITY > IDP > General
The following table describes the labels in this screen.
Table 74 SECURITY > IDP > General Setup
LABEL DESCRIPTION
General Setup
Enable Intrusion
Detection and
Protection Select this check box to enable IDP on the ZyWALL. When this check box is
cleared the ZyWALL is in IDP “bypass” mode and no IDP checking is done.
Turbo Card This field displays whether or not a ZyWALL Turbo Card is installed.
Note: You cannot configure and save the IDP and Anti-Virus
screens if the ZyWALL Turbo Card is not installed.