ZyXEL Communications 5 Series - Manual (Page 570)

ZyWALL 5/35/70 Series User’s Guide
570 Chapter 34 WAN and Dial Backup Setup
Figure 318 Menu 11.3.1: Remote Node PPP Options
This table describes the Remote Node PPP Options Menu, and contains instructions on how to
configure the PPP options fields.
34.8 Editing TCP/IP Options
Move the cursor to the Edit IP field in menu 11.3, then press [SPACE BAR] to select Yes.
Press [ENTER]
to open Menu 11.3.2 - Remote Node Network Layer Options. Not all fields
are available on all models.
Menu 11.3.1 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Enter here to CONFIRM or ESC to CANCEL:
Table 210 Menu 11.3.1: Remote Node PPP Options
FIELD DESCRIPTION
Encapsulation Press [SPACE BAR] and then [ENTER] to select CISCO PPP if your Dial Backup
WAN device uses Cisco PPP encapsulation, otherwise select Standard PPP.
Compression Press [SPACE BAR] and then [ENTER] to select Yes to enable or No to disable Stac
compression.
Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to
save your configuration, or press [ESC] at any time to cancel.