ZyXEL Communications 5 Series - Manual (Page 681)

ZyWALL 5/35/70 Series User’s Guide
Chapter 48 System Maintenance Menus 8 to 10 681
48.2 Call Control Support
The ZyWALL provides two call control functions: budget management and call history.
Please note that this menu is only applicable when Encapsulation is set to PPPoE or PPTP
in menu 4 or menu 11.1.
The budget management function allows you to set a limit on the total outgoing call time of
the ZyWALL within certain times. When the total outgoing call time exceeds the limit, the
current call will be dropped and any future outgoing calls will be blocked.
Call history chronicles preceding incoming and outgoing calls.
To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 - System
Maintenance - Call Control, as shown in the next table.
Figure 428 Call Control
48.2.1 Budget Management
Menu 24.9.1 shows the budget management statistics for outgoing calls. Enter 1 from Menu
24.9 - System Maintenance - Call Control to bring up the following menu. Not all fields are
available on all models.
bm These commands configure bandwidth management settings and display bandwidth
management information.
idp These commands configure intrusion detection and prevention settings.
av These commands configure anti-virus settings.
as These commands configure anti-spam settings.
certificates These commands display certificate information and configure certificate settings.
8021x These commands configure 802.1x settings and display 802.1x information.
radius These commands display RADIUS information and configure RADIUS settings.
Table 249 Valid Commands
COMMAND DESCRIPTION
Menu 24.9 - System Maintenance - Call Control
1.Budget Management
2.Call History
Enter Menu Selection Number: