Star Micronics Line Thermal/Dot Printer - Manual (Page 74)

Rev. 0.00
3-62
STAR LIne Mode Command Specifications
BEL
[Name] External device 1 drive instruction
[Code]
ASCII BEL
Hexadecimal 07
Decimal 7
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function] Executes the external device drive conditions set according to the command to set the external drive
device pulse width (ESC BEL n1 n2).
As with other commands, it temporarily stores data in the data buffer, then executes in the order re-
ceived.
(Note) External device 1 and external device 2 cannot be executed simultaneously.
FS
[Name] External device 1 drive instruction
[Code]
ASCII FS
Hexadecimal 1C
Decimal
28
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function] Executes the external device drive conditions set according to the command to set the external drive
device pulse width (ESC BEL n1 n2).
As with other commands, it temporarily stores data in the data buffer, then executes in the order re-
ceived.
(Note) External device 1 and external device 2 cannot be executed simultaneously.