Esc rs d n – Star Micronics Line Thermal/Dot Printer User Manual
Page 125
Rev. 0.00
3-113
STAR Line Mode Command Specifications
ESC RS d n
[Name] Set print density
[Code]
ASCII
ESC
RS
d
n
Hexadecimal
1B
1E
64
n
Decimal
27
30
100
n
[Defined Area]
Thermal
: 0 ≤ n ≤ 15
48 ≤ n ≤ 57 (“0” ≤ n ≤ “9”), 65 ≤ n ≤ 70 (“A” ≤ n ≤ “F”)
Slip
: -
Validation
: -
[Initial Value]
Thermal
: Memory switch setting
Slip
: -
Validation
: -
[Function]
Sets print density.
This command stops printing to be executed.
When in 2-color print mode, this can set the print density of red print.
n
Print Density
Single Color Printing Mode
2-color Printing Mode Red Print Density
0, 48
Print density 1.3
Print density 1.2
1, 49
Print density 1.2
Print density 1.2
2, 50
Print density 1.1
Print density 1.0
3, 51
Print density 1.0
Print density 1.0
4, 52
Print density 0.9
Print density 1.0
5, 53
Print density 0.8
Print density 0.8
6, 54
Print density 0.7
Print density 0.8
7, 55
(Reserved)
(Reserved)
8, 56
(Reserved)
(Reserved)
9, 57
(Reserved)
(Reserved)
10, 65
(Reserved)
(Reserved)
11, 66
(Reserved)
(Reserved)
12, 67
(Reserved)
(Reserved)
13, 68
(Reserved)
(Reserved)
14, 69
(Reserved)
(Reserved)
15, 70
(Reserved)
(Reserved)
Only setting is valid
Setting is valid after switching to thermal.