Command function list – Star Micronics Line Thermal/Dot Printer User Manual
Page 7
Rev. 0.00
2-1
STAR LIne Mode Command Specifications
2. COMMAND FUNCTION LIST
• Standard Commands
Class
Commands
Name
Thermal
Slip, Validation
Font style
ESC RS F
Select font
-
and character
set
ESC GS t
Select code page
←
ESC GS =
Write blank code page data
←
ESC R
Specify international character set
←
ESC /
Specify/cancel slash zero
←
ESC SP
Set ANK right space
←
ESC M
Specify 12 dot pitch
Specify 7 x 9 font (half dots)
ESC P
Specify 15 dot pitch
Specify 5 x 9 font (2P-1)
ESC :
Specify 16 dot pitch
Specify 5 x 9 font (3P-1)
ESC g
Specify 14 dot pitch
-
ESC 6
-
-
ESC 7
-
-
Character
expansion
settings
ESC i
Set/cancel the double wide/high
-
ESC W
Specify/cancel expanded wide
←
ESC h
Specify/cancel expanded high
←
SO
Set double wide printing
←
DC4
Cancel expanded wide
←
ESC SO
Set double high
-
ESC DC4
Cancel expanded high
-
Print modes
ESC E
Select emphasized printing
←
ESC F
Cancel emphasized printing
←
ESC -
Select/cancel underline mode
←
ESC _
Select/cancel upperline mode
←
ESC 4
Selects white/black inversion
Select white/black inversion red/
black colors (substitute function)
ESC 5
Cancel white/black inversion
Cancel white/black inversion red/
black colors (substitute function)
ESC GS 4
-
Select red/black substitute function
[ESC 4/5 setting]
SI
Select upside-down printing
←
DC2
Cancel upside-down printing
←
ESC RS i
-
Specify/cancel character rotated
mode
Line spacing
LF
Line feed
←
CR
Line feed
←
ESC a
Feed paper n lines
←
ESC z
Select line feed amount
←
ESC 0
Specify line feed to 3 mm
Specify line feed amount of 1/8
inch
ESC 1
Specify line feed to 3 mm
Specify line feed amount of 7/72
inch
ESC J
n/4 mm line feed
n/72 inch paper feed
ESC j
-
Reverse paper feed
ESC I
n/8mm line feed
n/144 inch paper feed
ESC A
Specify line feed amount of 3
mm/4mm
Define n/72 inch pitch line feed
ESC 2
Specify line feed amount (Defined
by ESC A n)
←
ESC 3
-
Specify n/216 inch paper feed
ESC y
-
Specify n/144 inch paper feed