Star Micronics Line Thermal/Dot Printer - Manual (Page 189)

Rev. 0.00
5-14
STAR LIne Mode Command Specifications
5-3) Appendix 3 – Blank Code Page Configuration
Blank code pages are character code tables that are empty from character code 80H to FFH. They can be specified
using the command below.
• ESC GS t n (n = 255)
Also, it is possible to write data to the blank code page area using the command below.
• ESC GS = …..
When registering data, Font A and Font B data must be registered as a set.
1. Example configuration of Font A data. (12 x 24 font)
Fig. A-1 12 x 24 Font
MSB LSB MSB LSB
d1 d2 0 0 0 0
d3 • • • • d4 0 0 0 0
d5 • • • • • • d6 • • 0 0 0 0
d7 • • d8 • • 0 0 0 0
d9 • • d10 • • 0 0 0 0
d11 • • d12 • • 0 0 0 0
d13 • • d14 • • 0 0 0 0
d15 d16 • • 0 0 0 0
d17 d18 • • 0 0 0 0
d19 d20 • • 0 0 0 0
d21 • d22 • 0 0 0 0
d23 • • d24 0 0 0 0
d25 • • d26 0 0 0 0
d27 • • d28 0 0 0 0
d29 • • • d30 0 0 0 0
d31 • • • d32 0 0 0 0
d33 • • d34 0 0 0 0
d35 • • d36 0 0 0 0
d37 • • • d38 0 0 0 0
d39 • • • • • • • d40 • • • 0 0 0 0
d41 • • • • • • • d42 • • • 0 0 0 0
d43 d44 0 0 0 0
d45 d46 0 0 0 0
d47 d48 0 0 0 0