Star Micronics Line Thermal/Dot Printer - Manual (Page 37)

Rev. 0.00
3-25
STAR Line Mode Command Specifications
3-3-4) Line Spacing
LF
[Name] Line feed
[Code]
ASCII LF
Hexadecimal 0A
Decimal 10
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : Memory switch setting
Slip : 1/6 inch line feed
Validation : 1/6 inch line feed
[Function] Feeds the currently specified amount of paper.
If print data exists in the line buffer, it prints that data.
Initial value of line feed amount is set by the memory switch.
CR
[Name] Carriage return (Print line feed)
[Code]
ASCII CR
Hexadecimal 0D
Decimal 13
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : Memory switch setting
Slip : Memory switch setting
Validation : Memory switch setting
[Function] Specifies the function according to the memory switch value.
See each printer’s product specifications manual for details on the memory switch settings.
Memory SW Function
Condition (1) Ignored
Condition (2) Same as the LF code.
,
Memory SW Function
Condition (1) Ignored
Condition (2) Same as the LF code.
Condition (3) Executes only printing, with no paper feed.