Star Micronics Line Thermal/Dot Printer - Manual (Page 59)

Rev. 0.00
3-47
STAR Line Mode Command Specifications
ESC % N
[Name] Specify/cancel ANK download characters
[Code]
ASCII ESC % n
Hexadecimal 1B 25 n
Decimal 27 37 n
[Defined Area] Thermal : n = 0, 1, 48, 49
Slip : n = 0, 1, 48, 49
Validation : n = 0, 1, 48, 49
[Initial Value] Thermal : Cancel ANK download character
Slip : Cancel ANK download character
Validation : Cancel ANK download character
[Function] Specifies/cancels ANK download characters
n Download characters
0, 48 Cancel ANK download characters
1, 49 Specify ANK download characters
1. Registration of ANK download character (ESC & c1 c2 n d1…d48)
2. Specify ANK download characters (ESC % n (n = 1))
3. Print ANK download characters
(Note) The settings using this command are valid for all stations and modes.