Star Micronics Line Thermal/Dot Printer - Manual (Page 114)

Rev. 0.00
3-102
STAR LIne Mode Command Specifications
ESC * r Y n NUL
[Name] Move vertical direction position (Line feed for specified dots)
[Code]
ASCII ESC * r Y n NUL
Hexadecimal 1B 2A 72 59 n 00
Decimal 27 42 114 89 n 0
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Moves vertical direction position.
Moves position n dots with this command.
When the current page length setting is in continuous print mode, and n dots exceed the remaining
dot count of the raster image buffer length, the data in the print buffer is printed, and paper is fed n
dots when this command is received.
Also, when the page length is set, data in the print buffer is printed, and paper is fed once the set
page length when this command is received. The remaining paper feed is performed at the print ex-
ecution command thereafter.
n is a decimal description (max. 255 digits) using ASCII characters.
,
Use prohibited.
ESC FF NUL
[Name] Execute FF mode
[Code]
ASCII ESC FF NUL
Hexadecimal 1B 0C 00
Decimal 27 12 0
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Executes FF mode.
Executes operation specified by the FF mode setting command ESC * r F n NUL.
,
Use prohibited.