Star Micronics Line Thermal/Dot Printer - Manual (Page 15)

Rev. 0.00
3-3
STAR Line Mode Command Specifications
3-3) Standard Command Details
3-3-1) Font style and character set
ESC RS F n
[Name] Select font
[Code] ASCII ESC RS F n
Hexadecimal 1B 1E 46 n
Decimal 27 30 70 n
[Defined Area] Thermal : 0 ≤ n ≤ 1, n = 16
Slip : -
Validation : -
[Initial Value] Thermal : n = 0
Slip : -
Validation : -
[Function]
Select font
n Font
0 Font-A (12 x 24 dots)
1 Font-B (9 x 24 dots)
16 OCR-B (16 x 24 dots)
When OCR-B font is selected, the following functions are invalid.
• Code Pages
• Blank Code Pages
• International Characters
• Slashed Zero
When using the OCR-B font to read characters using a scanner, cancel adornment, expansion and
external character settings. Also, check the OCR-B font by actual use.
,
Only setting is valid
Setting is valid after switching to thermal.