Star Micronics Line Thermal/Dot Printer - Manual (Page 107)

Rev. 0.00
3-95
STAR Line Mode Command Specifications
ESC * r F n NUL
[Name] Set raster FF mode
[Code]
ASCII ESC * r F n NUL
Hexadecimal 1B 2A 72 46 n 00
Decimal 27 42 114 70 n 0
[Defined Area] Thermal : n = 0, 1, 2, 3, 8, 9, 12, 13
Slip : -
Validation : -
[Initial Value] Thermal : n = 13
Slip : -
Validation : -
[Function]
Sets raster FF mode.
The FF mode operates to execute using the raster document quit command ESC FF NUL.
n is a decimal description (max. 255 digits) using ASCII characters.
FF mode setting format
n Form Feed Cut Feed Cutter
0 Set To Default Set To Default Set To Default
1 ○ (*1) -- --
2 ○ (*1) ○ --
3 ○ (*1) Tear Bar --
8 ○ (*1) -- Full Cut
9 ○ (*1) ○ Full Cut
12 ○ (*1) -- Partial Cut
13 ○ (*1) ○ Partial Cut
(*1) Form Feed
When the printer is a model handling BM and is set for BM to be effective, the set raster mode page
length is ignored and BM detecting is performed.
,
Use prohibited.