Star Micronics Line Thermal/Dot Printer - Manual (Page 133)

Rev. 0.00
3-121
STAR Line Mode Command Specifications
ESC GS * W
[Name] Register mark format to non-volatile memory
[Code]
ASCII ESC GS * W
Hexadecimal 1B 1D 2A 57
Decimal 27 29 42 87
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function] Registers the mark format (mark height, mark line feed amount, mark color, and mark horizontal
width) in non-volatile memory.
After registration to the non-volatile memory, execute a printer reset.
ESC GS * C
[Name] Initialize mark format in non-volatile memory
[Code]
ASCII ESC GS * C
Hexadecimal 1B 1D 2A 43
Decimal 27 29 42 67
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Initializes the mark format (mark height, mark line feed amount, mark color, and mark horizontal
width) registered in non-volatile memory.
After initialization, resets the printer.
Mark Format Initial Value
• Mark Height: “016” (16 dots)
• Mark Line Feed Amount: “032” (32 dots)
• Mark Color: “0” (White → All Mark Numbers)
• Mark Horizontal Width: “080” (80 dots) → All Mark Numbers)