Star Micronics Line Thermal/Dot Printer - Manual (Page 167)

Rev. 0.00
3-155
STAR Line Mode Command Specifications
ESC !
[Name] Select line mode (Default)
[Code]
ASCII ESC !
Hexadecimal 1B 21
Decimal 27 33
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Two bytes ignored
,
Select line mode (Default)
When this command is executed in page mode, the printer returns to line mode without printing.
When returning to line mode, all conditions such as print data in the print region, region coordinate
information, and rotation direction are cleared.