Star Micronics Line Thermal/Dot Printer User Manual

Page 162

Rev. 0.00

3-150

STAR LIne Mode Command Specifications

Example of Use

1) Register logo to use as the water mark as logo #1.

2) Water mark function is valid.:

ESC GS h 1 k m n (k=0x02, m=0x01, n=0x01)

3) Transmit print data:

Print data (print length is within the length of the image buffer)

4) Trigger command transmission:

ESC d n (cutter command is water mark printing trigger)

Only setting is valid

Setting is valid after switching to thermal.

(Note) When using this function, the data volume for one page should be within the printer’s

buffer length.