Star Micronics Line Thermal/Dot Printer - Manual (Page 38)

Rev. 0.00
3-26
STAR LIne Mode Command Specifications
ESC a n
[Name] Feed paper n lines
[Code]
ASCII ESC a n
Hexadecimal 1B 61 n
Decimal 27 97 n
[Defined Area] Thermal : 1 ≤ n ≤ 127
Slip : 1 ≤ n ≤ 127
Validation : 1 ≤ n ≤ 127
[Initial Value] Thermal : Memory switch setting
Slip : 1/6 inch
Validation : 1/6 inch
[Function] Executes paper feed of (currently specified line feed amount x n).
If print data exists in the line buffer, it prints that data.
This paper feed amount is unaffected even if there are vertical expanded characters in one line.