Star Micronics Line Thermal/Dot Printer - Manual (Page 110)

Rev. 0.00
3-98
STAR LIne Mode Command Specifications
ESC * r T n NUL
[Name] Set raster top margin
[Code]
ASCII ESC * r T n NUL
Hexadecimal 1B 2A 72 54 n 00
Decimal 27 42 114 84 n 0
[Defined Area] Thermal : 0 ≤ n ≤ 2
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Sets the raster top margin.
n is a decimal description (max. 255 digits) using ASCII characters.
n Top margin
0 Set To Default
1 Set top margin using reverse paper feed.
2 Set standard top margin.
(*) This differs according to the model handling this command.
When in the raster mode, the top margin setting of line mode remains.
When quitting the raster mode, continue the top margin setting of the raster mode and return to the
line mode.
,
Use prohibited.