Star Micronics Line Thermal/Dot Printer - Manual (Page 104)

Rev. 0.00
3-92
STAR LIne Mode Command Specifications
ESC * r B
[Name] Quit raster mode
[Code]
ASCII ESC * r B
Hexadecimal 1B 2A 72 42
Decimal 27 42 114 66
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Quits raster mode.
When raster mode is quit, and raster data remains in the raster mode image buffer, the raster mode
will be quit after executing raster EOT mode.
,
Use prohibited.
ESC * r C
[Name] Clear raster data
[Code]
ASCII ESC * r C
Hexadecimal 1B 2A 72 43
Decimal 27 42 114 67
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Clears the image buffer data of the raster mode.
,
Use prohibited.