Star Micronics Line Thermal/Dot Printer - Manual (Page 188)

Rev. 0.00
5-13
STAR LIne Mode Command Specifications
(5) Printer status (variable)
Status sent by printer
The content of the status differs according to the cause.
Refer to Commands That are Factors, and Automatic Status for details on the content of the status.
(6) Delimiter 2 (1 byte)
Sends “;”.
3) Status transmission specifications list
Status Generating
Factors
STAR
ASB
Length Status Data
Status Type Delimiter Data Status Printer Delimiter
First and
Second
Bytes
Factors
Third and
Fourth Bytes
n Parameter
1 Type Length Status 2
ASB
Auto Status ASB 0x0000 -- -- -- -- -- -- --
ESC ACK SOH
Printer Status Request ASB 0x0000 -- -- -- -- -- -- --
ENQ
Printer Status Request ASB 0x0008 “01” Omitted “:” “B” 0x0001 Status “;”
EOT
Printer Status Request ASB 0x0008 “02” Omitted “:” “B” 0x0001 Status “;”
ESC SYN 3 n
Presenter Counter
Request
ASB 0x0011 “13” “00” ≤ n ≤
“01”
“30” ≤ n ≤
“31”
“:” “B” 0x0008 Status “;”
ESC GS x I
PDF417 Information
Request
ASB 0x000C “16” Omitted “:” “B” 0x0005 Status “;”
ESC GS y I
QR Code Information
Request
ASB 0x000D “19” Omitted “:” “B” 0x0006 Status “;”
ESC FS M m n
MICR Function ASB Variable
Length
“A0” “30” ≤ n ≤ “31” “:” “B” Variable
Length
Status “;”