Star Micronics Line Thermal/Dot Printer - Manual (Page 165)

Rev. 0.00
3-153
STAR Line Mode Command Specifications
3-14) Page Mode Command Details
FF
[Name] Batch printing of page data (valid only in page mode)
[Code]
ASCII FF
Hexadecimal 0C
Decimal
12
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Refer to “Page Control Command.”
,
When in page mode, the printer batch prints page data expanded in the page region, then returns to
line mode.
After batch printing of the page mode, data in the page, the page print region and print direction are
all initialized.
Note that when the printer is in line mode, nothing functions.