Star Micronics Line Thermal/Dot Printer - Manual (Page 112)

Rev. 0.00
3-100
STAR LIne Mode Command Specifications
b n1 n2 data
[Name] Send raster data (auto line feed)
[Code]
ASCII b n1 n2 d1 d2 ... dk
Hexadecimal 62 n1 n2 d1 d2 ... dk
Decimal 98 n1 n2 d1 d2 ... dk
[Defined Area] Thermal : 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255, 0 ≤ d ≤ 255
k = n1 + n2 x 256, 1 ≤ k
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Sends raster data.
Raster data is sent in (n1 + n2 x 256) byte counts as binary data.
Raster data exceeding the print area currently set is discarded.
The image buffer expanded position is automatically line fed one dot row and moved to the left mar-
gin on the next line after expanded the image buffer data 1 dot row using this command.
Also, data expansion is duplicated on the data in the current image buffer (OR process).
The following shows expanded image buffer for the set raster print color.
n is a decimal description (max. 255 digits) using ASCII characters.
Print color Expanded image buffer
Black Image buffer for black
Cyan Image buffer for color
Magenta Image buffer for color
Yellow Image buffer for color
,
Use prohibited.