Star Micronics Line Thermal/Dot Printer - Manual (Page 27)

Rev. 0.00
3-15
STAR Line Mode Command Specifications
ESC SO
[Name] Set double high
[Code]
ASCII ESC SO
Hexadecimal 1B 0E
Decimal 27 14
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : Double high expansion cancelled.
Slip : Double high expansion cancelled.
Validation : Double high expansion cancelled.
[Function] Specifies double high for ANK characters and Kanji characters.
This command is equivalent to ESC h 1.
(Note) The settings using this command are valid for all stations and modes.
ESC DC4
[Name] Cancel expanded high
[Code]
ASCII ESC DC4
Hexadecimal 1B 14
Decimal 27 20
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : Double high expansion cancelled.
Slip : Double high expansion cancelled.
Validation : Double high expansion cancelled.
[Function] Cancels expanded high if the following commands specify expanded high.
• Double high specifying command (ESC SO)
• Set/cancel the double high (ESC h)
• Set/cancel double wide/high (ESC i)
This command is equivalent to ESC h 0.
(Note) The settings using this command are valid for all stations and modes.