Star Micronics Line Thermal/Dot Printer - Manual (Page 169)

Rev. 0.00
3-157
STAR Line Mode Command Specifications
ESC T n
[Name] Set page mode rotation direction
[Code]
ASCII ESC T n
Hexadecimal 1B 54 n
Decimal 27 84 n
[Defined Area] Thermal : -
Slip : 0 ≤ n ≤ 3, 48 ≤ n ≤ 51, (“0” ≤ n ≤ “3”)
Validation : 0 ≤ n ≤ 3, 48 ≤ n ≤ 51, (“0” ≤ n ≤ “3”)
[Initial Value] Thermal : -
Slip : n = 0
Validation : n = 0
[Function]
Three bytes ignored
,
Sets the rotation in page mode to the items in the table below, according to the n value.
Setting valid only when line mode.
n Rotation Direction
0, 48 0°
1, 49 270°
2, 50 180°
3, 51 90°
1 2 3 4 5 • • •
A B C D E • • •
1 2 3 4 5 • • • A B C D E • • •
1 2 3 4 5 • • •
A B C D E • • •
1 2 3 4 5 • • • A B C D E • • •
n=3 n=2 n=1 or 4 n=0
90°Rotation 180°Rotation 270°Rotation 0°Rotation