Star Micronics Line Thermal/Dot Printer - Manual (Page 47)

Rev. 0.00
3-35
STAR Line Mode Command Specifications
VT
[Name] Feed paper to vertical tab position
[Code]
ASCII VT
Hexadecimal 0B
Decimal
11
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Feeds paper to the next vertical tab position.
This command is ignored if there are no tabs set.
If a vertical tab is set, and the current position is the same as the vertical tab position, or if it is below
that position, it feeds paper to the top of the next page.
If data exists in the line buffer when feeing paper to the vertical tab position, it executes the paper
feed to the vertical tab position after printing that data.
However, if moved to the vertical tab position by printing data remaining in the buffer, the move to
the vertical tab position is considered to have been executed, so a move to the next vertical tab posi-
tion is not performed.
There is no initial value for the vertical tab.
,
One byte ignored