Star Micronics Line Thermal/Dot Printer User Manual
Page 11
Rev. 0.00
2-5
STAR LIne Mode Command Specifications
• Mark Commands
Class
Commands
Name
Thermal
Slip, Validation
Mark Commands ESC GS * 0
Print mark
-
ESC GS * 1
Specify mark height and line feed
-
ESC GS * 2
At each mark number
Specify mark color, mark horizontal
width
-
ESC GS * W
Register mark format to non-
volatile memory
-
ESC GS * C
Initialize mark format from non-
volatile memory
-
• Auto Logo Commands
Class
Commands
Name
Thermal
Slip, Validation
Auto Logo
Commands
ESC GS / W
Register Auto Logo setting to non-
volatile memory
-
ESC GS / C
Initialize Auto Logo setting from
non-volatile memory
-
ESC GS / 1
Set ON/OFF for Auto Logo function -
ESC GS / 2
Set command characters
-
ESC GS / 3
Set user macro 1
-
ESC GS / 4
Set user macro 2
-
ESC GS / 5
Set command character switching
method
-
ESC GS / 6
Set partial cut just prior to Auto
Logo printing
-
• PDF417 Commands
Class
Commands
Name
Thermal
Slip, Validation
PDF417
Commands
ESC GS x S 0
Set PDF417 bar code size
-
ESC GS x S 1
Set PDF417 ECC (security level)
-
ESC GS x S 2
Set PDF417 module x direction
size
-
ESC GS x S 3
Set PDF417 module aspect ratio
-
ESC GS x D
Set PDF417 bar code data
-
ESC GS x P
Print PDF417 bar code
-
ESC GS x I
Get PDF417 bar code expansion
information
←
• Print Start Trigger Control Commands
Class
Commands
Name
Thermal
Slip, Validation
Print starting
trigger
ESC GS g 0
Print starting trigger
-
ESC GS g 1
Set print start timer
-
• QR Code Commands
Class
Commands
Name
Thermal
Slip, Validation
QR Code
ESC GS y S 0
Set QR code model
-
ESC GS y S 1
Set QR code mistake correction level
-
ESC GS y S 2
Set QR code cell size
-
ESC GS y D 1
Set QR code data (auto setting)
-
ESC GS y D 2
Set QR code data (manual setting) -
ESC GS y P
Print QR code
-
ESC GS y I
Get QR code expansion
information
←