Star Micronics Line Thermal/Dot Printer - Manual (Page 105)

Rev. 0.00
3-93
STAR Line Mode Command Specifications
ESC * r D n NUL
[Name] Drawer drive
[Code]
ASCII ESC * r D n NUL
Hexadecimal 1B 2A 72 44 n 00
Decimal 27 42 114 68 n 0
[Defined Area] Thermal : 0 ≤ n ≤ 3
Slip : -
Validation : -
[Initial Value] Thermal : n = 0
Slip : -
Validation : -
[Function]
Drives the drawer in the raster mode.
Drawer drive conditions conform to line mode setting command ESC BEL n1 n2.
n is a decimal description (max. 255 digits) using ASCII characters.
n Drive circuits
0 None
1 External device drive 1 drive
2 External device drive 2 drive
3 External device drive 1 drive and external device drive 2 drive
,
Use prohibited.