Star Micronics Line Thermal/Dot Printer - Manual (Page 171)

Rev. 0.00
3-159
STAR Line Mode Command Specifications
3-16) Presenter Related Command Details
The following commands control the presenter functions.
The following commands are effective only on models equipped with a presenter.
ESC SYN 0 n
[Name] Execute presenter paper recovery
[Code]
ASCII ESC SYN 0 n
Hexadecimal 1B 16 30 n
Decimal 27 22 48 n
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Four bytes ignored
ESC SYN 1 n
[Name] Set presenter paper automatic recovery function and automatic recovery time
[Code]
ASCII ESC SYN 1 n
Hexadecimal 1B 16 31 n
Decimal 27 22 49 n
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Four bytes ignored
ESC SYN 3 n
[Name] Acquire presenter paper counter
[Code]
ASCII ESC SYN 3 n
Hexadecimal 1B 16 33 n
Decimal 27 22 51 n
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Four bytes ignored