Siemens Brodersen MC55 AT - Manual (Page 69)

MC55_ATC_V04.00 Page 69 of 475 3/17/06
Confidential / Released
If the type is 2, 4 or 5,
AT+COPS
with the appropriate displays the same operator name.
0 Indicator is deregistered, i.e. no such indicator event report (URC) will be
issued. =0 is power-up and factory default of indicators defined by
AT^SIND
only.
1 Indicator is registered.
• Indicator event reports are controlled via
AT+CMER
.
• All indicators can be registered or deregistered via
AT^SIND
, but different
default settings apply: Power-up and factory default of the indicators sup-
ported by
AT+CIND
is =1, while, as stated above, indicators defined
by
AT^SIND
only are set to =0.
2 Query the registration status and the current value of a single indicator type.
If delivered by the network: Number of new voice messages sent as part of the Voice Message Waiting Indicator.
Refer to .
Operator in format which depends on the type associated to the operator name. Refer to .
Service Provider Name according to the status settings (SIM Service No. 17) in the SIM Service Table (SST) of
the SIM.
Universal Time delivered as part of the "nitz" Indicator. Refer to .
Time Zone delivered as part of the "nitz" Indicator. Refer to .
Adjustment for Daylight Saving Time as part of the "nitz" Indicator. Refer to .
Example
Activation and use of indicator "audio":
4 Any operator name stored internal to the ME (alphanumeric format, can con-
tain up to 16 characters).
5 Broadcast MCC-MNC (numeric format which consists of a 3-digit country code
plus a 2- or 3-digit network code).
(num)
(str)
AT^SIND="audio",1
You register the indicator "audio".
^SIND: audio,1,0
OK
AT+CMER=2,,,2
You activate the Indicator Event Report with
AT+CMER
.
OK
A set of all registered URCs is presented. (Please note that the example
includes the indicators registered due to the power-up default settings
of
AT+CIND
.)
+CIEV: battchg,5
+CIEV: signal,99
+CIEV: service,1