Siemens Brodersen MC55 AT - Manual (Page 329)

MC55_ATC_V04.00 Page 329 of 475 3/17/06
Confidential / Released
12.27 AT+FTS Stop Transmission and Wait
This command causes the TA to terminate a transmission and wait for 10 millisecond intervals before
sending the OK result code to the TE.
Syntax
Parameter Description
no. of 10 millisecond intervals
0...85
Note
• Used for Fax Class 1 only
Write Command
AT+FTS=
Response(s)
OK
In on-hook mode:
ERROR
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
TIA/EIA-578 ! % ! % ! ! ! ! !
(num)